Herunterladen Inhalt Inhalt Diese Seite drucken

Accessories; Internet Access Module (Iam) - SystemAir SAVE VTR 150/B Betriebs- Und Wartungsanleitung

Vorschau ausblenden Andere Handbücher für SAVE VTR 150/B:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

54

| Accessories

Malfunction
Low supply air
temperature
Noise/vibrations
11
Accessories
SAVE VTR 150/B have many available accessories that can be used to expand functionality of the unit and increase
comfort level.
Recommended accessories can be always found at Systemair website
number or the name of the desired accessory.

11.1 Internet Access Module (IAM)

Internet access module is a device that allows to connect
to the unit and control it via a mobile application or
directly from the computer and receive automatic
updates.
The Cloud is a mediator between the user and the unit.
To access your unit via Cloud, it has to be connected to
the internet via Internet Access Module.
Component/product — Article number:
• Internet Access Module (IAM) – 211243
1. Check the display for alarms.
2. Check the active user functions in HMI screen if Defrosting function is running.
3. Check set supply air temperature in the HMI.
4. Check if ECO mode is activated in HMI (it is a power saving function and prevents the
heater from activating).
5. Check if user modes HOLIDAY, AWAY or CROWDED are activated in the HMI or via a
hardwired switch.
6. Check the analogue inputs in the service menu to verify that the temperature sensors
are functioning correctly.
7. In case of installed electrical/other re-heater battery: Check if the overheat protection
thermostat is still active. If necessary, reset by pressing the red button on the front plate
of the electrical re-heater.
8. Check if the extract filter must be changed.
9. Check if the unit has a re-heater battery connected. At very cold outdoor conditions an
electrical or water heating battery might be necessary. A re-heater battery can be
acquired as an accessory.
1. Clean fan impellers.
2. Check that the screws holding the fans are tightened.
3. Check that the anti vibration lists are fitted to the mounting bracket and to the back of
the unit.
4. Check that the rotor belt is not slipping if the unit has rotating heat exchanger.
Action
www.systemair.com
by searching the article
GB
212024 | A001

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis