Unit Information; Alarms - SystemAir SAVE VTR 150/B Betriebs- Und Wartungsanleitung

34
| SAVECair control
7.7.1

Unit Information

A basic read-only information about status of the unit, configured components and inputs/outputs.
7.7.1.1 Components
Type and settings of heat exchanger, heater, cooler, extra controller.
7.7.1.2 Sensors
Values from sensors and load of fans (rpm).
7.7.1.3 Input Status
Status of configured analog, digital and universal inputs. Connected component type and raw value (volts) is displayed.
7.7.1.4 Output Status
Status of configured analog, digital and universal outputs. Connected component type and value (volts) is displayed.
7.7.1.5 Unit Version
Unit model name, manufacturer number, serial number and unit software versions for Mainboard, HMI and IAM.
7.7.2

Alarms

A detailed information about active system alarms and alarm log of last 20 events.
7.7.2.1 Active Alarms
Alarm screen is empty if there are no active or logged alarms.
Press HELP button on the active alarm to access FAQ and troubleshooting (if available). Press ACKNOWLEDGE on the in-
dividual alarm to clear it. Depending on alarm type and the cause, it might be necessary to do a troubleshooting first to
acknowledge active alarm.
It may be not possible to clear the status of alarm if the cause of alarm is still present, as that would immediately trigger
alarm to return.
7.7.2.2 Alarms log
Alarm log allows to view last 20 alarms.
Each alarm contains information:
• Alarm name
• Date/time stamp
• Information if the alarm stops the unit or other note
GB
212024 | A001