Fitting The Kitchen Furniture Panel As A Door; Savecair Control; General - SystemAir SAVE VTR 150/B Betriebs- Und Wartungsanleitung

26

| SAVECair control

2. Install four hooks near the edges on the kitchen furniture panel. Sticker with marked holes (figure 23, pos. 1) is in-
cluded with the unit. Holes mark spots for screws to attach hooks. Place the sticker on a back of the kitchen furniture
panel, figure 23, pos. 2). Size of the sticker is the same as the unit. Manually mark out distances from the edges in
case the panel is bigger than the sticker.
Once correct position is found, attach four hooks (figure 23, pos. 3) by fastening each with two screws (figure 23,
pos. 4). Hang the panel on protruding bolts (figure 23, pos. A).
If the kitchen furniture panel does not align with cabinets, take it off and adjust bolts, brackets or hooks.
6.4.3

Fitting the kitchen furniture panel as a door

Another suggested option is to use hinges instead of brackets and install the kitchen furniture panel as a hinged cup-
board door. Hinges or other needed parts for this installation method are not included in the package.
7 SAVECair control
7.1

General

SAVECair is a modern touchscreen LCD control panel, simply known as HMI — Human Machine Interface. The
touchscreen display provides information about current state of the unit and allows you to control all system functions.
Fig. 23 Installation of hooks and mounting of the cover
Fig. 24 Kitchen furniture panel as a door
GB
212024 | A001