Installation With 251-10/B Cooker Hood - SystemAir SAVE VTR 150/B Betriebs- Und Wartungsanleitung

12
| Installation
6.2

Installation with 251-10/B cooker hood

The SAVE VTR 150/B is to be mounted above a stove.
Continue to follow instructions how to find the correct height and depth for mounting bracket installation.
A
B
C, Electrical stove
C, Gas stove
D
E
F
G
Important!
• The unit requires regular maintenance and therefore kitchen furniture panel between cabinets where the unit is lo-
cated must be removable.
Fig. 4 SAVE VTR 150/B in a kitchen environment
Minimum distance between cabinets (mm)
SAVE VTR 150/B unit width (mm)
Minimum distance between stove surface and cooker
hood (mm)
Minimum distance between stove surface and cooker
hood (mm)
Distance between the unit and the cooker hood when
it is inserted directly into the unit (mm)
Note:
When flexible duct is used, distance between
the unit and cooker hood is decided by the
installer (minimum 100 mm).
The cooker hood height (mm)
Total height of the unit with inserted cooker hood
(mm)
Distance to the mounting bracket from the underside
of the cooker hood or underside of the cupboard if it is
aligned with the cooker hood (mm)
Note:
This distance must be increased according to
the increased measurement D if flexible duct is
used.
600
596
450 (Recommended 500)
650
10
150
790
750
212024 | A001
GB