Filters - SystemAir SAVE VTR 150/B Betriebs- Und Wartungsanleitung

GB
• DP — diverting plug
• HMI — SAVECair control panel
Component/product — Article number:
• CE/CD-diverting plug 4pin — 37367
• CEC Cable w/plug 12m — 24782
• CEC Cable w/plug 6m — 24783
• SAVECair HMI White — 138077
• SAVECair HMI Black — 138078
Installation and connection
1. Connect diverting plug to the connection box socket dedicated for external control panel (HMI) or Internet access
module (IAM).
2. Plug in control panels to diverting plug(s) using recommended cables or any cable with RJ22 type plugs.
Note:
The maximum supported cable length is 50 meters.
Configuration
1. Go to Service menu
2. Enter password (default 1111)
3. Go to Communication ⇒ HMI Address and change the address number. Repeat these steps for each connected
control panel.
Each control panel must have it's own unique address number. No control panel should have the same address value
to function properly.

11.6 Filters

The filters need to be replaced when polluted. New sets of filters, if possible, should be acquired directly from Systemair
to meet filter quality standards. If that is not possible, please contact your installer or wholesaler.
The filter type is labelled on the top of the filter
Component/product — Article number:
• PFVTR 150 M5/ePM10 60% Supply Air — 211121
• PFVTR 150 M5/ePM10 60% Extract Air — 211120
• PFVTR 150 F7/ePM1 55% Supply Air — 211122
212024 | A001
Accessories | 67