G-Code-Bearbeitungsprogramm - Siemens 840D sl Handbuch

Bild 7-7
7.17.4

G-Code-Bearbeitungsprogramm

G17 G54 G71
WORKPIECE(,,"","BOX",112,1,-20,-100,-2.5,-2.5,182.5,182.5)
;****************Werkzeugwechsel****************
T="PLANFRAESER" D1 M6
G95 FZ=0.1 S3000 M3 M8
CYCLE61(50,1,1,0,-2.5,-2.5,185,185,2,80,0,0.1,31,0,1,10)
G0 Z200 M9
;****************Werkzeugwechsel****************
T="FRAESER20" D1 M6
G95 FZ=0.14 S3900 M3 M8
CYCLE76(50,0,1,,20,180,180,10,0,0,0,5,0,0,0.14,0.14,0,1,185,185,1,2,2100,1,101)
;CYCLE62(,2,"MA1","MA0")
CYCLE62(,2,"E_LAB_A_TEIL_4_TASCHE","E_LAB_E_TEIL_4_TASCHE")
CYCLE62(,2,"E_LAB_A_TEIL_4_INSEL","E_LAB_E_TEIL_4_INSEL")
CYCLE63("TEIL_4_GEN_01",11,50,0,1,10,0.1,0.3,40,3.5,0,0,0,0,0,2,1,15,1,2,,,,0,101,111)
G0 Z200 M9
;****************Werkzeugwechsel****************
T="FRAESER10" D1 M6
G95 FZ=0.04 S8500 M3 M8
Fräsen
Bedienhandbuch, 07/2010, 6FC5398-7CP40-0AA0
3D-Ansicht
ShopMill-Programm erstellen
7.17 Beispiel Standardbearbeitung
269