Setting The Relative Position Of The Arc/Laser; Safety; Stick Out - Fronius LaserHybrid Bedienungsanleitung

Setting the relative position of the arc/laser

Safety

Stick out

WARNING! Work that is carried out incorrectly can cause serious injury and dam-
age. Set up work must only be performed by trained and qualified personnel. Ob-
serve the safety regulations in the operating instructions, paying particular
attention to the section entitled "Safety inspection".
(1)
14 mm
(2)
NOTE! When setting the physical
position of the welding torch, en-
sure the stick-out is always 14
mm.
(1) Welding torch
(2) Contact tip
(3) Stick out
(3)
69