Minipack-Torre Pratika 56CS Installations-, Gebrauchs- Und Wartungsanleitung Seite 38

Chapter 6. Machine adjustment and setting up
PHASE 5
Feed the film between the two rollers (R3) and the two wheels (R4) on the feeder.
Insert the film as shown in the figure and secure it to the pin on the rear flange (F).
PHASE 6
Next, adjust the positioning bars (B), regulating the knob (M3) in order to lock the reel, and leaving a gap of 5 mm
between the bars and the reel.
N.B.: The reel is positioned correctly when the left edge of the film (viewed from the rear of the machine) is at a
distance A, equivalent to half the distance H (aperture of the triangles).
37
GB