Establishing The Power Supply - G&D DL-DVI-Vision-IP-Fiber-Serie Installation Und Bedienung

Establishing a connection to the Gigabit Ethernet
IMPORTANT: The device uses components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE:
Remove the protection caps from the Transmission interfaces and the cable
plugs.
Transmission|Tx: Insert the LC plug of a fibre optic cable, which is available as acces-
sory, into this interface. Connect the other end to the Gigabit Ethernet.
Transmission|Rx: Insert the LC plug of a fibre optic cable, which is available as acces-
sory, into this interface. Connect the other end to the Gigabit Ethernet.

Establishing the power supply

Main Power: Insert one of the supplied IEC cables here.
To provide a second, redundant power supply, connect a portable power
Red. Power:
pack to this interface.
Installation
G&D DL-DVI-Vision-IP-Fiber · 10