Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
Establishing a connection to the Gigabit Ethernet
IMPORTANT:
The device uses components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE:
Remove the protection caps from the Transmission interfaces and the cable
plugs.
Transmission|Tx:
Insert the LC plug of a fibre optic cable, which is available as acces-
sory, into this interface. Connect the other end to the Gigabit Ethernet.
Insert the LC plug of a fibre optic cable, which is available as acces-
Transmission|Rx:
sory, into this interface. Connect the other end to the Gigabit Ethernet.
Establishing the power supply
Insert one of the supplied IEC cables here.
Main Power:
To provide a second, redundant power supply, connect a portable power
Red. Power:
pack to this interface.
9 · G&D DL-DVI-Vision-IP-Fiber
Werbung
Kapitel
Inhaltsverzeichnis
