Automatic Closing Of The Osd After Inactivity - G&D DL-DVI-Vision-IP-Series Installation Und Bedienung

Configuration

Automatic closing of the OSD after inactivity

If desired, you can set the OSD to close automatically after a period of inactivity.
The period of inactivity can be defined by entering a value between
NOTE:
To disable the function, enter the value
How to change the period of inactivity after which the OSD closes:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Select the row
5. Enter the desired time range from
6. Press to save your settings.
F2
1. Click on
IP Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tabs
4. Under Close OSD when inactive for [s]
from 5 to 99
5. Click OK to save your changes.
55 · G&D DL-DVI-Vision-IP-Fiber
(default) to open the on-screen display.
and press
Console setup
and press
Personal Profile
Close OSD when inactive for [s]
Remote > Extender system > Personal profile
seconds.
0 .
.
Enter
.
Enter
and press
to seconds and press
5 99
on the directory tree.
, enter the desired time range
5 and 99 seconds.
.
Enter
.
Enter
.