Changing The Video Mode Of Consoles - G&D DL-DVI-Vision-CAT Installation Und Bedienung

Configuration
1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on
Configuration
3. Click on the tab
4. Click on the tab
station (on the
Click on the tab
station (on the
5. In the field
Enabled
Disabled
6. Click on Save
Related topics:
 Operating the KVM extender exclusively on page 13
 Changing the video mode of consoles on page 29

Changing the video mode of consoles

In the standard configuration of the KVM extender, the computer's image is output at
the monitor of the active console as well as at the monitor of the concurrent console.
You can also define that the image of the other console is deactivated during con-
sole inputs.
The image of the other monitor is shown again as soon as the user has finished their
inputs at the console.
29 · G&D DL-DVI-Vision-CAT
KVM extender
.
.
General
CPU if you want to configure the access to the local work-
module).
CPU
if you want to configure the access to the remote work-
CON
module).
CON
Permanent access mode
 right for exclusive access is granted (default)
 right for exclusive access is denied
.
.
, select one of the following options: