Description; Operation And Functions; Technical Data; Operating Environment - Nouvag TCM Endo III Bedienungsanleitung

TCM Endo III

1.1 Operation and functions

The TCM Endo is a microprocessor controlled endodontic electronic motor system.
The slow speed, high torque rotary instrument uses an electronic torque controlled motor to achieve a
faster and easier root canal preparation. The speed is held constant under varying loads until the
selected torque level is reached.
The protection mode (AP) provides an automatic protection against file breakage. When the file reaches
the selected torque level, the motor reverses immediately to protect the file, and then returns to forward
to finish the root canal preparation. With use of the (AP) mode, file stress is greatly reduced.

1.2 Technical Data

Voltage: ............................................................ 115V∼ / 50-60Hz or 230V∼/ 50-60Hz (see device label !)
Fuses: ..................................................................................2 x T2A (for 115V∼) and 2 x T1A (for 230V∼)
Power: ..............................................................................................................................................40 VA
Type: ......................................................................................................................Application part type B
Speed: ....................................................................................................................... 1,200 – 16,000 rpm
Dimension: ..................................................................................................................90 x 100 x 170 mm
Net weight: ..........................................................................................................................................2 kg

1.3 Operating Environment

Relative Humidity: ....................... max. 80%
Temperature: ..............................10 to 40°C
Barometric Pressure:......... 800 to 1060hPa

1.5 Description on device

: Attention: Read instructions first
: Application part Type B
1275 : Sign of EU-Conformity
2

1 Description

1.4 Transport and Storage Environment

Relative Humidity:............................. max. 90%
Temperature:..................................... 0 to 60° C
Barometric Pressure: ..............700 to 1060hPa
NOUVAG AG
: Certified by the Canadian
Standards Association (CSA) for
Canada and USA
: Old electrical and electronic
equipment must be disposed
separately and may not be
included in regular domestic
waste.
No. 31817 29/05