Operation; Starting The Md; Keyboard; Setting The Revolutions - Nouvag MD 10 Bedienungsanleitung

MD 10

5.1 Starting the MD 10

Press green "ON/OFF" switch.

5.2 Keyboard

A) Display: Indication of the revolutions (speed), torque or pump speed.
B) Multiplying key "1:5" (for contra angle 1:5):
Speed: 2,500 – 200,000 rpm
C) Multiplying key "1:1" (for contra angle 1:1):
Speed: 500 – 40,000 rpm
D) Reduction "16:1" (for contra angle 16:1):
Speed: 30 – 2,500 rpm
E) Reduction "32:1" (for contra angle 32:1):
Speed: 15 – 1,250 rpm
F) Fixed key "SAW" (for Nouvag saws):
Speed: 14,000 rpm
G) Fixed key "MUCO" (for Nouvag Mucotome):
Speed: 8,000 rpm
H) Key "ATC SET":
Press key "ATC SET" to adjust the torque limiter AL or AS.
I) Key "PUMP SET":
Press key "PUMP SET" to adjust the pump speed.
The green light on key B) to I) illuminates, when the key is activated.
J) Taste "DOWN":
To decrease the speed, torque and pump.
K) Taste "UP":
To increase the speed, torque and pump.
L) Light "MOTOR ON":
The green light indicates that the electronicmotor is switched on.
M) Light "REVERSE MODE":
The green light indicates that the electronicmotor operates in reverse and a warning tone will sound.

5.3 Setting the revolutions-

1) Press the appropriate reduction or multiplying key (for example key "32:1" for contra angle 32:1).
6

5 Operation

16:1 32:1
Torque: 1, 2 Ncm
Torque: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 Ncm
Torque: 5, 7, 10, 12, 15, 17, 20, 25, 30, 35 Ncm
Torque: 10, 15, 20, 25, 30, 35, 40, 45, 50, 55 Ncm
Torque: 10 Ncm
Torque: 10 Ncm
NOUVAG AG
No. 31820 22/07