System Assembly; Operation; Set-Up - Nouvag MD 10 Bedienungsanleitung

MD 10
14
1. Control unit
2. Keyboard panel
3. Mains switch "ON / OFF"
4. Pedal socket "FOOT SWITCH"
5. Motor socket "MOTOR"
6. Electronicmotor
7. Handpiece support
8. Contra angle (not included)
9. Tubing set
10. Cooling fluid flask
11. Hanger rod for liquid flask

4.1 Set-up

1) Insert solution hanger in support on panel of control unit.
2) Insert electronicmotor plug into motor socket "MOTOR".
3) Insert pedal plug into pedal socket„FOOT SWITCH".
4) Attach contra angle to electronicmotor.
→ see row of pictures right:
5) Loosen and lift screw latch from pump lid.
6) Open lid forward.
7) Remove demonstration tube.
8) Insert tube set.
9) Close pump lid, lower screw latch and close.
4

3 System Assembly

11
13
12
15
16
21

4 Operation

10
19
18
17
9
1
2
3
4
5
7
8
6
20
12. Pump
13. Mains cable
14. Foot control (IP68)
15. Switch for Pump and Forw/Rev
16. Foot plate
17. Tube clamp
18. Drip chamber
19. Air valve
20. Mains cable socket
21. Voltage switch
NOUVAG AG
No. 31820 22/07