Removing/Attaching The Cover; Removing The Insert Reducing; Care Instructions - BabySafe Westie Instruction

REMOVING/ATTACHING THE COVER

To remove the cover, the seat shell (A) has to be removed from the base (B) first.
(SEE "Remove the seat")
1. Loose the harness system by adjusting the central device.
2. Unlock the harness buckle, then take off the Pelvic Insert for new born to 13kg.
3. First remove the cover from the headrest.
4. Use a pencil-like tool to push the elastic bands buttons from top to downwards
direction, and take off the bands which attached to two buttons on both side on
the seat shell.
5. Thread the main buckle body through the buckle pad and out underneath the
cover
6. Loose the elastic bands which are located in the placed marked red on the rever-
se side of the cover, and pull the seat off in forward direction to take off the main
cover.
Check that all the locks are closed and all anchoring are correctly fastened.
3
3
4
4
2
2
4
4
1
1
6
5
18

REMOVING THE INSERT REDUCING

CARE INSTRUCTIONS

Light dirt can be easily removed with a damp cloth. The cover can also be removed
and washed at 30'C. Remove the back cushion from the cover of the head support
before y ou wash it.
The cover material color may run slightly when wet, in particular during washing.
Do not use solvents on the cover!
If the ch ild's bodyweight exceeds 9kg, the
pre-mounted pelvic insert should be remo-
ved.
19