ELNA eXpressive 820 Gebrauchsanleitung Seite 50

e
e
Fit the template into the inner hoop. (L and R
markings on the inner hoop should be visible.)
Place the inner hoop and template over the fabric,
matching the centerlines.
R
L
Place the outer hoop on a flat surface. Position
inner hoop, template and fabric over the outer
hoop.
Set inner hoop into outer hoop and slightly tighten
r
the hoop tightening screw . Gently pull fabric
taut in hoop, respecting the fabric grain (vertical
and horizontal). Check fabric and template
centerlines. Once fabric is taut and properly
positioned, tighten adjustment screw with
screwdriver.
r
Remove template from inner hoop.
48