Embroidery Hoops; Stabilizers - ELNA eXpressive 820 Gebrauchsanleitung

e
A
B
e
q
w
r
q
w
r

Embroidery Hoops

Hoop A
The embroidery area is 126mm x 110mm
(5" x 4 3/8"). Ideal for sewing many of the built-in
designs and designs from optional PC design
cards.
Hoop B
The embroidery area is 140mm x 200mm
(5 1/2" x 8"). Use the generous dimensions of this
hoop for large size designs or combine several
designs or alphabets into one arrangement.
Hoop Part Names:
q
Outer hoop
w
Inner hoop
e
Hoop turnkey
r
Hoop tightening screw

Stabilizers

All embroidery needs some form of stabilizer that
can be easily removed. Use a stabilizer
appropriate to the fabric and project. Common
forms of stabilizer for embroidery sewing are
fusible, adhesive, tear-away, heat-away or wash-
away.
The fusible type is recommended for stretch
fabrics and fabrics that might shrink. Adhesive type
is great for velvets or other napped fabrics that
would be damaged if secured in the hoop. The non
adhesive types should be used when embroidering
fabric which cannot be ironed or for areas which
are difficult to iron.
Most stabilizers should be used on the wrong side
of fabric. More than one layer may be required.
Wash-away stabilizer may be placed on top of
fabrics like toweling so the loops lay flat under the
embroidery.
For any type of stabilizer, prepare a piece larger
than the embroidery hoop and place it in the hoop
so that the entire piece can be fastened within.
44