20. Erase all settings, reset
If necessary, you can erase all of your settings and return
the roller shutter belt winder system to its original factory
settings.
After a reset has been carried out all settings will be
deleted:
◆ End points
◆ Current time
◆ Opening and closing time
1.
+
+
Press and hold the three keys for
approx. 8 seconds.
During these 8 seconds, all symbols
will appears, then the display will
disappear.
MO DI MI DO FR SA SO
i
▲ ▼ AUTO
2.
Release the buttons as soon as the display disappears.
▲ ▼
Display after a reset and/or after an
approx. 8 hour power failure.
8 8 : 8 8
WI
SO
MANU
:
–
– –
AUTO
3.
1 x
Reset the time, see page 99.
▲ ▼
The display will start at 12:00 hours.
4.
Carry out the settings again as detailed from page 96
onwards.
EN
I 2 : 0 0
AUTO
103