Safety Instructions For Electrical Connection - RADEMACHER RolloTron Comfort 9600 Betriebs- Und Montageanleitung

i

10. Safety instructions for electrical connection

Danger due to electric shock when working on all
electrical systems.
◆ The electrical connection and all work on electrical
systems must only be carried out by a qualified electri-
cian in accordance with the connection instructions in
these operating instructions.
◆ Carry out all installation and connection work only in
an isolated, zero-volts state.
◆ Disconnect all phases of the mains power supply cable
and secure it to prevent any re-connection.
◆ Check the system for a zero-voltage status.
◆ Check that the voltage / frequency on the type plate
corresponds to local mains conditions prior to instal-
lation.
NOTE
The electrical connection for the roller shutter belt winder
can be made either with an connecting cable with mains
plug or via a fixed laid cable.
IMPORTANT
The mains socket and plug must be easily accessible at
all times.
EN
89