i
25. Technical Specifications
Supply voltage:
Nominal power:
Standby power:
Nominal torque:
Maximum speed:
Transient operation:
Protection class:
Number of switching times:
Mains connecting cable:
Dimensions:
Housing material:
Power failure
The display flashes in the event of a power failure.
The control LED lights up permanently again after pressing
the Up ( ▲ ) or Down ( ▼ ) key.
Data retention after brief power failure
All settings remain unaltered when the power fails briefly.
As soon as the power supply is restored, the opening and
closing times will be executed again.
230 V / 50 Hz
70 W
< 0.5 W
10 Nm (Comfort device and Comfort device for mini belt)
14 Nm (Roller shutter belt winder for large belt boxes)
30 RPM. (Comfort device and Comfort device for mini belt)
24 RPM. (Roller shutter belt winder for large belt boxes)
4 minutes (maximum running time)
II (only for use in dry rooms)
2 (UP and DOWN)
2 x 0.75 mm
(H03VVH2-F)
2
see page 87
Recyclable plastic
Power reserve
The roller shutter belt winder has a power reserve of approx.
8 hours. Should the power failure take longer than 8 hours,
the following display will appear:
▲ ▼
Subsequently the time must be reset, see page 99.
:
–
– –
AUTO
EN
111