17. Manual operation
After adjusting the end points, you can control the roller
shutter belt winder with the two control buttons. Manual
operation is possible in any of the modes and has priority
over the automatic functions.
1.
Open the roller shutters.
Pressing the button causes the roller
shutters to move to the upper end point.
➜
2.
Causes the roller shutters to stop in
or
the interim.
3.
Closing the roller shutters.
Pressing the button causes the roller
shutters to move to the lower end point.
➜
98
7 : 0 0
AUTO
▲
▼
The set opening time and the respective
travel direction are briefly displayed.
2 0 : 0 0
▼ AUTO
▲
The set closing time and the respective
travel direction are briefly displayed.
EN
Controls