Electrical Connection - RADEMACHER RolloTron Comfort 9600 Betriebs- Und Montageanleitung

i

10.1 Electrical connection

1.
Connect the desired cable.
The colour coding is irrelevant for the installation.
Damaged cables can
cause short circuits.
◆ Pay attention that cables are laid safely.
◆ The connecting cable may not be pinched when screw-
ing on the belt winder as this could lead to damage.
2.
Lay the connecting cable safely.
◆ If you use a cable with an mains plug, then this should
be subsequently laid in the roller shutter belt winder
cable duct.
3.
Finally, screw on the traction relief mechanism with the
screws provided.
90
Comfort device
Traction
relief
Cable duct
Device for large belt boxes
e. g. mains power plug cable:
2 x 0.75 mm H03WH2-F
2 -
Traction relief
EN