Erase All Settings, Software Reset - RADEMACHER RolloTron Basis DuoFern1200 Original - Betriebs- Und Montageanleitung

i

16. Erase all settings, software reset

If necessary, you can erase all of your settings and
return the RolloTron Basic DuoFern 1200 system to its
original factory settings.
1.
Remove the cover plate from the lower assembly
screws and setting buttons.
2.
+ + Simultaneously press and hold the
AUTO
buttons for 4 seconds.
3.
(red) In this process, the indicator light
rapidly flashes red.
4.
Release the buttons, subsequently the following set-
tings will be deleted:
◆ End points
◆ All of the registered DuoFern devices
In addition:
◆ The automatic functions are switched on
EN
87