Deleting All Settings - Loading Factory Settings - RADEMACHER RolloTron Montage- Und Bedienungsanleitung

9.7 Deleting all settings - loading factory settings

Remove the cover plate from
the setting buttons.
4 seconds
Simultaneously press and hold all three buttons for 4 seconds
and the red LED flashes. Then the red LED lights up for
5 seconds.
The following settings are erased after you release the
buttons:
End points
●
Favourite position
●
DECT base station (FRITZ!Box)
●
i
Then the RolloTron DECT is reset to the default
factory settings.
70
DECT
DECT