Fire-Fighting; Data On Serial Plate; Routine Maintenance - Nussbaum TTC 500 Betriebsanleitung

We also recommend you to adopt more measures for environment protection: recycling of the internal and external packaging of the product and
disposing properly used batteries (if contained in the product).
With your help it is possible to reduce the amount of natural resources used to produce electrical and electronic equipments, to minimize
the use of landfills for the disposal of the products and to improve the quality of life by preventing that potentially hazardous substances
are released in the environment.
The manufacturer's Serial plate is fixed on the back of the machine.
If gives the following information:
1- Manufacturer name and address;
2- Model;
3- Serial number;
4- Phases;
5- Voltage requirements;
6- Frequency;
7- Rated draw;
8- Power absorbed;
9- Max. hydraulic pressure
10- Weight;
11- Year.
WARNING!
All maintenance work must be done only after the plug has been disconnected from the power supply.
To ensure that this TTC 500 tyre changer works perfectly over the years, carry out the routine maintenance schedule described below:
1) Lubricate the following parts from time to time, after a thorough cleaning with naphtha:
- horizontal carriage runners
- vertical carriage runners
- spindle threaded shaft
2) From time to time check the oil level in the hydraulic power pack. Use the dipstick under the reservoir cap.
If necessary top up with Esso Nuto H46 or similar hydraulic oil (eg, Agip Oso 46, Shell Tellus Oil 46, Mobil DTE 25, Castrol Hyspin AWS 46,
TTC 500

16. FIRE-FIGHTING

WARNING!
If this machine catches fire, use powder or CO

17. DATA ON SERIAL PLATE

18. ROUTINE MAINTENANCE

2
etinguishers only.
4
6
5
7
8
10
40
(1*/,6+ ‡ ,QVWUXFWLRQV PDQXDO
1
2
9
11
3