Care & Maintenance - Sartorius Miras 2 Betriebsanleitung

Care and Maintenance
Cleaning
Unplug the scale from the AC power
$
before cleaning.
$ To clean the weighing platform:
use a piece of cloth, wet with a com-
mercially available cleaning agent
(IPA – Isopropyl Alcohol) to wipe it
down. Follow the manufacturer's
instructions for the cleaning agent.
!
Never use concentrated acids,
bases, solvents or pure alcohol to
clean the weighing platform.
!
Do not use high-pressure cleaning
equipment to clean the weighing
platform.
$ If the scale is installed in a pit, make
sure that no debris builds up in the
crevices between the pit and the
platform to prevent weighing errors.
Regularly remove debris from the
$
bottom of the pit.
Cleaning the Inside of the Platform
$ To clean the inside of the weighing
platform, remove the load plate
(applicable for single load cell plat-
forms).
!
Please follow the safety
instructions.
$ Use compressed air to blow debris
out of the inside of the scale. Make
sure that no debris builds up in the
gap between the load receptor and
the fastening plate to avoid com-
promising the overload protection.
Corrosive Environment
$ Remove all traces of corrosive sub-
stances from the weighing platform
on a regular basis.
32
Safety Inspection
If there is any indication that safe oper-
ation of the scale with the AC is no
longer guaranteed:
$ Turn off the power and disconnect the
equipment from AC power immediately
Lock the equipment in a secure place to
$
ensure that it cannot be used for the
time being
Safe operation of the scale with the AC
is no longer ensured when:
– There is visible damage to the AC
adapter
– The AC adapter no longer functions
properly
– The AC adapter has been stored for a
relatively long period under unfavorable
conditions
In this case, notify your nearest
service center or your local dealer.
Maintenance and repair work may only
be performed by service technicians
who
– Have access to the required mainte-
nance manuals
– Have attended the relevant service
training courses
Instructions for Recycling
the Packaging
To ensure safe shipment, your scale has
been packaged using environmentally
friendly materials. After successful
installation of the scale, you should
return this packaging for recycling.
For information on recycling options,
including recycling of old weighing
equipment, contact your municipal
waste disposal center or local recycling
depot.