Sartorius Miras 2 Betriebsanleitung Seite 14

Power Management Option
Scale connected to AC power:
On/Off Switch:
On: Scale is operational and display
shows function or mode that is in use
Off: Depends on menu setting ("4.
Standby option."), scale is completely
off (no display and no internal circuitry)
or in standby (no display and internal
circuitry working).
Back Light:
Depends on menu setting ("2. Back-
light"). Backlight is on/off.
Auto Power Off:
Not active.
14
Scale running on battery power:
On/Off Switch:
On: Scale is operational and the display
shows the function or mode that is in
use
Off: Completely off (no display and no
internal circuitry working)
Back Light:
Depends on menu setting ("2. Back-
light"). Backlight is on/off. Backlight
goes off after 15 seconds if no opera-
tion is done (no key pressed/no weigh-
ing). Backlight comes back on whenever
a key (except on/off) is pressed or when
a load is placed on the scale.
Auto Power Off:
Depends on menu setting ("3. Auto
power off"); system power shuts down.
Time limit options for auto power in
setup menu are 5, 10 or 15 minutes,
or can be disabled.