Application Programs; Counting - Sartorius Miras 2 Betriebsanleitung

Application Programs

Counting

Step
a. Select application program
b. Select "Counting"
c. Press Print/Enter.
Display shows reference piece
selection menu.
Counting is blinking.
d. Automatically the display
will show the reference pieces.
Place container and press Tare
if required (display "tared").
e. Select reference sample quantity: (Fn/Up) or (G/N/Down)
5, 10, 20, 50 or 100, and put
the reference on the scale.
(quantity flashes)
f. Press Print/Enter .
Now "O" flashes.
active.
g. Place more reference samples
on scale (The number is
x+2 ~ 2x times the reference
pieces (x) selected in step e.)
When the sample is still, the
reference sample weight is calculated.
The flashing "O" goes out.
h. Place uncounted parts/samples
on the scale
i. Toggle between reference piece weight,
total weight, and total pieces.
j. Unload the scale
k. Counting application: Clear
18
Key (or instruction)
(Fn/Up) > 2 sec
(Fn/Up) or (G/N/Down)
repeatedly
(Print/Enter)
(Tare/Right)
repeatedly
Place reference sample on scale
Automatic optimization is
(Print/Enter)
(Zero/Left) > 2 sec
Display
(G/N/Down)