Print Formats - Sartorius Miras 2 Betriebsanleitung

Print Formats

Printing Options
Mode of operation Short print
Normal weighing Net weight
mode
Counting mode Net weight
Pcs
Ref. weight
Checkweighing Net weight
mode Chk OK/LO/HI
The print output can be configured for three modes: short mode (option 1.3.1), long/
block mode (option 1.3.2) and continuous mode (option 1.3.3). The SBI interface,
explained in the section above, is available in all modes. Sample print outputs are given
below for all three printing options in different weighing modes.
Note: To configure serial communication settings and print output options, please refer
to "Configuration (Setup menu)".
Refer to "Application Programs" to configure the display and control unit for different
weighing modes.
Block print (long print)
Gross weight
(if tare is active)
Tare weight
(if tare is active)
Net weight
Gross weight
(if tare is active)
Tare weight
(if tare is active)
Net weight
Pcs
Ref. weight
Gross weight
(if tare is active)
Tare weight
(if tare is active)
Net weight
Chk OK/LO/HI
LL (lower limit)
HH (upper limit)
Continuous mode
Gross weight
(if tare is not active)
or
Net weight
(if tare is active)
Pcs (as default)
Pressing the Gross/Net key
switches
to:
Gross weight
(if tare is not active)
or
Net weight
(if tare is active)
Press key to toggle between:
Gross weight (with unit 1)
and
Gross weight (with unit 2)
27 27