Siemens SINUMERIK 802C Inbetriebnahme Seite 95

32910
DYN_MATCH_TIME
- Time constant of dynamic adaption (control parameter set no): 0...5
0
32920 AC_FILTER_TIME
s Smoothing factor time constant for adaptive control
_always 0.0
33050 LUBRICATION_DIST
mm, Traversing distance for lubrication from PLC
Grad
_always 100000000
34000 REFP_CAM_IS_ACTIVE
- Axis with reference point cam
_always 1
34010 REFP_CAM_DIR_IS_MINUS
- Approach reference point in minus direction
_always 0
34020 REFP_VELO_SEARCH_CAM
mm/min, Reference point approach velocity
Umdr/min
_always 5000.0
34030 REFP_MAX_CAM_DIST
mm, Maximum distance to reference cam
Grad
_always 10000.0
34040 REFP_VELO_SEARCH_MARKER
mm/min, Creep speed (encoder no.)
Umdr/min
_always 300.0
34050 REFP_SEARCH_MARKER_REVERSE
- Direction reversal to reference cams (encoder no.)
_always 0
34060 REFP_MAX_MARKER_DIST
mm, Maximum distance to reference mark. Max. distance to 2 reference marks
Grad for distance-coded measuring systems.
_always 20.0
34070 REFP_VELO_POS
mm/min, Reference point positioning velocity
Umdr/min
_always 1000.0
34080 REFP_MOVE_DIST
mm, Reference point distance/target point for distance-coded system
Grad
_always -2.0
SINUMERIK 802C
6FC5 597-3AA20-0AP2 (01.02) (IBN)
6.1 Liste der Maschinen- und Settingdaten
0.0 plus
0.0 plus
0.0 plus
*** ***
*** ***
0.0 plus
0.0 plus
0.0 plus
*** ***
0.0 plus
0.0 plus
- -
Technischer Anhang
NEW_CONF
DOUBLE 2/7
POWER ON
DOUBLE 2/7
NEW CONF
DOUBLE 2/7
RESET
BOOLEAN 2/7
RESET
BOOLEAN 2/7
RESET
DOUBLE 2/7
RESET
DOUBLE 2/7
RESET
DOUBLE 2/7
RESET
BOOLEAN 2/7
RESET
DOUBLE 2/7
RESET
DOUBLE 2/7
RESET
DOUBLE 2/7
6-95