Siemens SINUMERIK 802C Inbetriebnahme Seite 93

30240 ENC_TYPE
- Type of actual value acquisition (actual position value) (encoder no.)
0: Simulation
2: Square-wave generator, standard encoder (pulse multiplication)
_always 0, 0
30350 SIMU_AX_VDI_OUTPUT
- Output of axis signals with simulation axes
_always 0
30600 FIX_POINT_POS
mm, Fixed-value positions of axis with G75 (position no.)
Grad
_always 0.0
31000 ENC_IS_LINEAR
- Direct measuring system (linear scale) (encoder no.)
_always 0
31010 ENC_GRID_POINT_DIST
mm Division period for linear scales (encoder no.)
_always 0.01
31020 ENC_RESOL
- Encoder markings per revolution (encoder no.)
_always 2048
31030 LEADSCREW_PITCH
mm Pitch of leadscrew
_always 10.0
31040 ENC_IS_DIRECT
- Encoder mounted directly to the machine (encoder no:)
_always 0
31050 DRIVE_AX_RATIO_DENOM
- Denominator load gearbox (control parameter no.): 0...5
_always 1, 1, 1, 1, 1, 1
31060 DRIVE_AX_RATIO_NUMERA
- Numerator load gearbox (control parameter set no.): 0...5
_always 1, 1, 1, 1, 1, 1
31070 DRIVE_ENC_RATIO_DENOM
- Denominator resolver gearbox (encoder no.)
_always 1
31080 DRIVE_ENC_RATIO_NUMERA
- Numerator resolver gearbox (encoder no.)
_always 1
31090 JOG_INCR_WEIGHT
mm, Evaluation of an increment with INC/handwheel
Grad
_always 0.001
SINUMERIK 802C
6FC5 597-3AA20-0AP2 (01.02) (IBN)
6.1 Liste der Maschinen- und Settingdaten
0 4
*** ***
- -
*** ***
0.0 plus
0.0 plus
0.0 plus
*** ***
1 2147000000
1 2147000000
1 2147000000
1 2147000000
- -
Technischer Anhang
POWER ON
BYTE 2/7
POWER ON
BOOLEAN 2/7
POWER ON
DOUBLE 2/7
POWER ON
BOOLEAN 2/7
POWER ON
DOUBLE 2/7
POWER ON
DWORD 2/7
POWER ON
DOUBLE 2/7
POWER ON
BOOLEAN 2/7
POWER ON
DWORD 2/7
POWER ON
DWORD 2/7
POWER ON
DWORD 2/7
POWER ON
DWORD 2/7
RESET
DOUBLE 2/7
6-93