Siemens SINUMERIK 802C Inbetriebnahme Seite 65

Instruction
Jump to Label If EN = 1, go to la-
bel n.
Label Label marker for the
jump.
Conditional Return If EN = 1, exit the
from Subroutine subroutine.
Conditional End If EN = 1, END ter-
minates the main
scan.
Instruction
If EN ½, go to sub-
Subroutine
routine n.
Instruction
Move Byte If EN = 1,
copy i to o.
Move Word If EN = 1,
copy i to o.
Move DWord If EN = 1,
copy i to o.
Move Real If EN = 1,
copy i to o.
Swap Bytes If EN = 1,
exchange MSB and
LSB of w.
SINUMERIK 802C
6FC5 597-3AA20-0AP2 (01.02) (IBN)
PROGRAM CONTROL FUNCTIONS
Ladder Symbol
n
JMP
n
LBL
RET
END
PROGRAM CONTROL FUNCTIONS
Ladder Symbol
n
SBR
EN
x1
x3
x2
(x... optional parameters)
MOVE, FILL AND FIND OPERATIONS
Ladder Symbol
MOV_B
EN
ENO
OUT
IN
MOV_W
EN ENO
OUT
IN
MOV_DW
EN ENO
OUT
IN
MOV_R
EN ENO
OUT
IN
SWAP
EN ENO
IN
Inbetriebnahme (IBN)
4.3 Inbetriebnahme der PLC
Valid Operands
Enable: EN
Label: WORD: 0-127
Label: WORD: 0-127
Enable: EN
Enable: EN
Valid Operands
Label: Constant : 0-63
Valid Operands
Enable: EN
In: VB, IB, QB, MB, AC, Constant, LB
Out: VB, IB, QB, MB, AC, LB
Enable: EN
In: VW, T, C, IW, QW, MW, AC,
Constant, LW
Out: VW, T, C, IW, QW, MW, AC, LW
Enable: EN
In: VD, ID, QD, MD, AC, Constant, LD
Out: VD, ID, QD, MD, AC, LD
Enable: EN
In: VD, ID, QD, MD, AC, Constant, LD
Out: VD, ID, QD, MD, AC, LD
Enable: EN
In: VW, IW, QW, MW, T, C, AC, LW
4-65