Specifications - DeVilbiss SmartLink DV5M Bedienungsanleitung

Problem
CPAP is not fully
functional.
dEVilBiSS SMaRtliNk SpEciFicatioNS
Size: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9" H x 3.1" W x 1.4" D (9.9cm H x 7.9cm W x 3.6cm D)
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.30 lbs. (0.14 Kg)
Electrical Rating:
Maximum Power Consumption (SmartLink Module only): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 W
Voltage and Current: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power supplied by the DV5X Series Device
Class II Equipment; Type BF Applied Parts; Continuous Operation
Operating Conditions:
Temperature Range:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41°F to 104°F (5°C to 40°C)
Humidity Range:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 95% R.H. non-condensing
Atmospheric Conditions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sea level to 9,000' (2,743 M)
Transportation and Storage Conditions:
Temperature Range:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°F to 158°F (-40°C to +70°C)
Humidity Range:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 95% R.H. non-condensing
dEVilBiSS guidaNcE aNd MaNuFactuRER'S dEclaRatioN
WaRNiNg
Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and
put into service according to the Electromagnetic Compatibility [EMC] information provided in the
accompanying documents.
Portable and Mobile RF Communications Equipment can affect Medical Electrical Equipment.
The equipment or system should not be used adjacent to or stacked with other equipment and that if
adjacent or stacked use is necessary, the equipment or system should be observed to verify normal
operation in the configuration in which it will be used.
NOTE– The EMC tables and other guidelines provide information to the customer or user that is essential in
determining the suitability of the Equipment or System for the Electromagnetic Environment of use, and in
managing the Electromagnetic Environment of use to permit the Equipment or System to perform its intended
use without disturbing other Equipment and Systems or non-medical electrical equipment.
EN - 10
Probable Cause
1. Module may be defective. 1. Remove the module from the CPAP and verify that
Remedy
CPAP is fully functional. If it functions properly
without the module connected, the module may be
defective. Contact provider. If it still is not fully
functional, consult the CPAP instruction guide for
troubleshooting.
A-DV5M-1