Medela Thopaz+ Gebrauchsanweisung Seite 27

Safety related tip
The acoustic alarm «Leak in system – 301» is deactivated for approximately 6 minutes
after Thopaz + is switched on.
Safety related tip
Everytime a new patient is connected, it is recommended to carry out the funtional
check.
Thopaz + is in Standby and is ready for use with the factory
5.
settings. (To change factory settings please refer to chapter
10 – Changing settings)
Connect the Thopaz + system to the patient catheter (drain)
6.
according to hospital guidelines. To start the therapy press «On».
Preparation for use / operating instructions
| 27