Dräger X-am 5000 Gebrauchsanweisung Seite 28

CE marking: See declaration of conformity on page 328.
3)
Approvals : (see "Notes on Approval" on page 327)
The BVS 10 ATEX E 080 X technical suitability test
is based on the adjustment with the target gas.
1) The Technical Handbook and Instructions for Use / data sheets for the utilized sensors and the PC
software CC Vision for Dräger X-am 5000 can be downloaded on the product page of the X-am
5000 at the following Internet site: www.draeger.com See also the instructions for use provided and
the data sheets for the sensors used.
2) Not part of the BVS10 ATEX E 080X and PFG 10 G 001X technical suitability test.
3) The technical suitability tests are valid for the X-am 5000 gas detection instrument and the
calibration cradle. The explosion-protection approvals are only valid for the X-am 5000 gas
detection instrument; the calibration cradle must not be used in the Ex zone.
28