Trimming The Helicopter - Reely Rex-X Nano Wichtige Informationen

g) Trimming the Helicopter
Push the pitch lever (see figure 1, Item 8) carefully forward and observe the response of your model. Shortly before the
helicopter starts hovering, you can already determine in which direction your model wants to move.
If the helicopter fuselage tip tries to turn to the right, reduce the speed and turn the trim wheel for the tail function (see
figure 1, item 4) gradually downwards.
Push the pitch lever carefully forward and check if the adjustment was sufficient. Keep repeating this procedure until
the helicopter no longer has any tendency to turn to the right.
If the fuselage tip turns to the left, carry out a trim adjustment upwards.
Figure 12
36