F) Practical Flight Tips For The First Start; G) Trimming The Helicopter - Reely Lama 5 Bedienungsanleitung

10 Operating the model helicopter
f) Practical flight tips for the first start
• Even if the model can fly in the narrowest spaces, for the first test flights, we recommend using a free
space of about 3 x 3 m.
• The support should be flat (tiles, parquet flooring, or similar) to allow you to determine already before
the take off if the model tends to drift off in a particular direction.
• Place yourself exactly behind your helicopter. As long as you can see your model from behind, the latter
will react to the control commands: right, left, forward, backward exactly as you see it.
Whereas, if the cockpit of the model points towards you, it reacts exactly the opposite way from your steer-
ing commands at the transmitter.
g) Trimming the helicopter
Push the Pitch stick carefully forward and observe the response of your model. Shortly before the helicopter
starts hovering, you can already determine in which direction your model wants to move.
• If the helicopter wants to turn to the right with the tip of the fuselage, then reduce the speed and push
the steering trim for the Tail function gradually to the left.
• Push the Pitch stick carefully forward and check if the adjustment was sufficient.
• Repeat the procedure until the model does not show any tendency to drift to the right.
• If the tip of the fuselage turns to the left, carry out a right trim adjustment.