Trimming The Helicopter - Reely 1527787 Bedienungsanleitung

g) Trimming the Helicopter
Push the pitch lever (see figure 1, item 7) carefully forward and observe the response of your model. Shortly before the
helicopter starts hovering, you can already determine in which direction your model wants to move.
If the helicopter tries to turn to the right with the tip of its fuselage, push the left trim button (see figure 1, item 4) re-
peatedly until the model no longer turns to the right on its own. If the model turns to the left, push the right trim button.
Figure 10
Putting a small additional weight to the tip of the fuselage can increase the tendency to fly forward automatically. If the
weight is placed at the rail, the tendency of flying forward will be reduced.
34