F) Practical Flight Advice For The First Start - Reely Rex-X Nano Wichtige Informationen

Nod Function
The nod function allows you to move your model helicopter forwards and backwards (see figure 11). For this, the
helicopter tail is equipped with an electric motor and a horizontal propeller. Depending on the rotational direction of the
tail propeller, the helicopter tail is pushed upwards or downwards. In hover flight, with the helicopter standing horizon-
tally, the tail propeller is not running.
This is also controlled with the right control lever (also see figure 1, item 5). If you press the lever slightly forward, the
tail rises and the model flies forwards. If you pull the lever towards the back, the tail drops and the model flies back-
wards.

f) Practical Flight Advice for the First Start

• Even though the model can fly in the narrowest of spaces, for the first test flights we recommend using a free space
of about 3 x 3 m.
• The support should be flat (tiles, parquet flooring, or similar) to allow you to determine even before take-off if the
model tends to drift off in a particular direction.
• Place yourself exactly behind your helicopter. As long as you can see your model from behind, it will react to the
control commands: right, left, forward, backward exactly as you see it. Whereas, if the cockpit of the model points
towards you, it reacts exactly the opposite way from your steering commands at the transmitter.
Figure 11
35