Scheppach EB1650 Originalanleitung Seite 58

Fig. 6
11
58
9
C
• Check the earth auger for correct functioning and its
safe operating condition.
• Do not work by yourself, someone has to be close in
case of emergencies.
• Hold on to the earth auger with both hands when
working.
• Ensure you have a safe position, during the drilling
process as well.
• Do not lean too far forwards when working.
• Check for a flawless idling mode.
• The auger must not rotate in idling mode when the
motor is warm.
• Immediately turn off the motor when you can feel
changes to the machine's behaviour.
• Do not place the hot auger in dry grass or on flam-
mable objects (fire risk!).
• Drill the hole in the ground in several sections so you
can remove the soil in between.
• Keep the auger vertical, do not twist it!
• Always secure bore holes, otherwise there is a risk
of injury!
• Exclusively drill holes in soil with the earth auger.
• Other applications are not permitted.
Starting the motor: (Fig. 6)
1 If the motor is cold, turn the choke lever (C) to the
„OFF" position.
2 If the motor is warm, turn the choke lever (C) to the
„ON" position.
3 Put the stop switch (11) in the rear position.
4 Lightly pull on the starter cord (9) until you can feel
resistance, then pull on the cord strongly 2-3 times
until the motor fires briefly.
5 Turn the choke lever (C) to „ON".
6 Pull the starter cord 2-3 times again until the motor
fires and runs in idle mode.
Warning! The earth auger only begins to rotate when
the throttle lever is used.
Stopping the motor
1 Put the stop switch (11) in the forward position.
2 When starting the motor again, push the stop switch
(11) into the rear position beforehand.
BEHAVIOUR DURING AN EMERGENCY
In the event of an accident, start required First Aid
measures and call for medical help as soon as you
can.
Report the following information:
– Location of accident
Type of injuries
–
How many injured
–
Person reporting
–