Scheppach EB1650 Originalanleitung Seite 56

Fig. 5
56
E
Throttle adjusting screw (Fig. 5)
The throttle adjusting screw (E) controls the motor
speed.
TRANSPORT
Leave the motor to cool down before transporting
the machine or storing it indoors in order to prevent
burning and fire hazards.
Turn off the motor even for short distances when
changing locations during work.
Carry the auger exclusively by the handle. Do not touch
the casing (risk of burning).
When transporting the auger in a vehicle, it must be
stored safely.
The fuel tank (12) must be emptied completely before
transport.
STORAGE
Storing the earth auger for one month or longer:
• Thoroughly remove dirt, deposits and dust from the
motor and the auger.
• Clean the air filter or replace it in case of heavy con-
tamination or damage.
• Clean the cylinder head fins.
• Store the earth auger safely in a dry room, not ac-
cessible to children.
• Do not store the auger outdoors.
• Empty the fuel tank for long-term storage.
• Change the transmission fluid.
Commissioning
• Before commissioning, it is important that you know
and follow the safety notices.
For all work on the earth auger, you must turn off the
motor, disconnect the spark plug connector and wear
safety gloves. Start the auger only after complete as-
sembly and checking it.
WARNING! Carefully read the safety notices (see
„Safety notices" and additional notices for petrol-
powered machines).
OPERATING THE EARTH AUGER
Warning! Wear safety boots and tight-fitting clothes
in order to prevent injuries.
• Before commissioning, it is important that you know
and follow the safety notices.
• Observe national stipulations during work when us-
ing the auger on public property or paths.
• Keep adults, children and animals away from the
hazardous area.
• Check the working environment for foreign bodies
and remove them.
• When leaving the machine, the motor must always
be turned off.