H) Switching Off The Device; Maintenance - Conrad Visiondrive Bedienungsanleitung

h) Switching Off the Device

To switch off the car camera, the supply voltage must be disconnected. For this,
pull the cigarette lighter plug from your vehicle's cigarette lighter socket or pull the
ignition key. The installed support battery completes the last dataset. Always wait for
the car camera to complete data fi nalising after disconnecting the car camera from
the vehicle power supply. Once data has been successfully stored, the GPS and
REC-LEDs go out.

14. Maintenance

Check the camera lens from time to time, clean it of dust and contamination. Use
a suitable lens cleaning system, e.g. a clean, soft brush. Do not push the optic/
mechanics of the camera too strongly, because they would be damaged. The lens
also may be scratched.
90