Herunterladen Inhalt Inhalt Diese Seite drucken

C) Record Setting - Conrad Visiondrive Bedienungsanleitung

Kfz-kamera mit gps
Vorschau ausblenden Andere Handbücher für Visiondrive:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Possible recording times in hours with different SD cards and resolutions:
For camera
Front & Rear
Front or Rear
Front & Rear
Front or Rear
Front & Rear
Front or Rear
Front & Rear
Front or Rear
c) Record Setting (fi gure 12b)
In this section, you may set various options for events and the status displays.
Record time after event (seconds)
You may select four different recording times (15, 30, 45 and 60 seconds) from a
value aid (small arrow). Depending on the time set, the set time is stored in the folder
"Event" as a separate video after an "Event" (e.g. after one of the G-sensors has
triggered). The fi rst 10 seconds before an "Event" are saved automatically as well.
When the "Record time after event" is set to 15 seconds, this means that 25 seconds
are saved as "Event File".
If the sensors react again due to outer events during the „event record-
ing" the record time will extend accordingly. Only when no sensor triggers
during the recording time set (Record time after event) will the „event
recording" terminate at the time set.
If several „events" are recorded at brief intervals, this may cause the
„normal" fi les to be useless.
80
With SD card
4 GB
4 GB
8 GB
8 GB
16 GB
16 GB
32 GB
32 GB
using
using
"High"
"Normal"
2,3
1,4
4,6
2,9
9,2
15,0
5,7
18,5
30,0
11,4
17,1
using
"Low"
3,8
6,0
2,1
4,0
7,5
12,0
4,3
8,0
24,0
8,6
16,0
48,0
32,0

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis