D) Placing The Connection Cables - Conrad Visiondrive Bedienungsanleitung

d) Placing the Connection Cables

☞
All cables that lead to the car camera must be securely attached to the
windscreen with the cable holders (fi gure 1, item 5). To impair view as
little as possible, they should be placed along the edge of the windshield.
Apply an adhesive pad to each cable holder. Remove the protective foil from the
cable holders prepared in this manner in sequence and install the cable holders in
a straight line from the installation site of the car camera (fi gure 6, item 1), starting
with the rear-view mirror (fi gure 6, item 2) towards the windscreen edge (fi gure 6,
item 3) and from there to the instrument panel on the shortest path (fi gure 6, item 4).
Figure 6
65