B) Video Setting - Conrad Visiondrive Bedienungsanleitung

b) Video Setting (fi gure 12a)
Set the camera to be selected at initialisation (Video Resolution) and the video reso-
lution (Video Quality). Click according to your needs.
Front the car camera is active
Rear the optional reversing camera is active
Front & Rear the car camera and the operational reversing camera are active
☞
Selecting the option „Front & Rear" will reduce the maximum image reso-
lution of both cameras to 10 frames per second (10 fps).
Selecting the option „High" for screen resolution will choose the highest
resolution. The highest resolution does, however, also require the most
memory.
Therefore, it is important to know how much memory capacity the SD
card has. Observe the following recording times in hours after which
the fi les recorded are replaced by new fi les depending on the resolution
selected.
Figure 12a
79