Maintenance And Cleaning - Conrad DV928 Bedienungsanleitung

17. Maintenance and cleaning

Servicing or repair may only be carried out by a specialist/specialist workshop. There are no components on the inside
of the product that need maintenance by you, this is why you should never open it (apart from the described approach
to insert or change the batteries, in these instructions).
To clean the exterior of the weather station, a dry, soft and clean cloth is sufficient.

Do not press too hard on the display, as this may cause scratch marks or lead to faulty displays.
Dust on the weather station can be easily removed with the help of a long-haired, soft and clean brush and a vacuum
cleaner.
Use a slightly damp soft cloth (moistened with lukewarm water) to remove dirt from the outdoor sensors.
Never use aggressive cleansing agents or other chemical solvents since this may damage the surface
of the housing or even impair operation.
Check the receptacle of the rain sensor sporadically. Despite the protective grid, small leave or dirt particles may clog
the opening on the bottom of the receptacle.
96