G) Setting The Time; H) Setting The Date; I) Changing The Temperature Unit; J) Changing The Sensitivity Of The Weather Forecast - Conrad WS 9624-IT Bedienungsanleitung

G) Setting the time

1. Press the "SET" button (D) 5 or 6 times. The hours and minutes
will flash, in this order.
2. Use the "+" button (C) to set the correct time.
. Press the "SET" button (D) to confirm your selection.
4. Press the "CH" button (A) to quit the settings menu.

H) Setting the date

1. Press the "SET" button 7 to 9 times. The year, day and month
will flash, in this order.
2. Use the "+" button (C) to adjust.
. Press the "SET" button (D) to confirm your selection.
4. Press the "CH" button (A) to quit the settings menu.

I) Changing the temperature unit

1. Press the "SET" button (D) 10 times to enter this settings menu.
The temperature display °C / F will flash.
2. When the display is flashing, use the "+" button (C) to toggle
between °F and °C.
. Press the "SET" button (D) to confirm your selection.
4. Press the "CH" button (A) to quit the settings menu.

J) Changing the sensitivity of the weather forecast

1. Press the "SET" button (D) 11 times. The display flashes.
2. When the display is flashing, use the "+" button (C) to toggle
between the three different sensitivity levels.
. Press the "SET" button (D) to confirm your selection.
The weather station can work with  different sensitivity levels to take regional
weather characteristics (rate of air pressure change) into account. The numerals 2,
 and 4 mean that an air pressure change of x in hPa causes the weather symbols
to change.
2

K) Tool bar "Weather boy" (symbol for temperature conditions)

One of the fifteen different temperature symbols (indicated by a "weather boy" in different clothing)
Time
is shown in the centre of the LC display. This indicates the different temperature conditions,
depending on the current outdoor temperature (temperature value measured by the outdoor
transmitter of channel 1):
>26°C
>78.8°F

L) Channel selection

If more than one outdoor sensor is connected, the input values of the different channels can be
viewed by pressing the "CH" button (A) in normal display mode; the channel numbers "1", "2" or
"" are displayed at the same time. If using only one sensor, there is no display.
M) Displaying the minimum and maximum outdoor temperature for the day
In normal mode, this weather station displays maximum and minimum outdoor temperatures for
each channel selected in the bottom section of the LC display. Note the channel number. To view
maximum and minimum temperature of the day for another channel, press the "CH" button (A)
in normal display mode..
19 - 25.9°C 10–18.9°C
66.2 - 78.6 °F 50 - 66°F
The minimum temperatures of the day are reset automatically to their current values
every day at 8:00 pm, the maximum temperatures at 8:00 am.
0 – 9.9°C < 0°C
2 – 49.8°F < 2°F