Configuring The Display - Conrad WH1070 Bedienungsanleitung

11. Maximum value for the rain quantity in 24 hours („24h")
12. Maximum value for the rain quantity in 1 week („week")
13. Maximum value for the rain quantity in 1 month („month")
While the base station is in normal display mode, press the button MIN/MAX twice.
The base station changes to the overview display of the minimum values (the values
on the display blink and „MIN" is displayed).
By pressing the +/
sequence. The corresponding minimum values are displayed together with the time
and date on which they were recorded.
You can delete the recorded minimum value and its time/date by pressing the SET
button.
1. Minimum value for indoor air humidity.
2. Minimum value for indoor temperature
3. Minimum value for outdoor air humidity.
4. Minimum value for outdoor temperature
5. Minimum value for windchill temperature
6. Minimum value for dew point temperature
7. Minimum value for air pressure
After calling up all minimum values, the base station switches back to the normal dis-
play mode.
You can immediately leave the minimum/maximum function by pressing
the HISTORY button. If no button is pressed for approx. 10 seconds, the
device automatically leaves the minimum/maximum memory function.
j) Configuring the display
In the basic setting mode, you will see a number of weather values. However, you
can change this basic setting to a certain extent and define the values to be dis-
played.
This chapter will tell you how to change the basic setting of the value display and
how to reset the rain quantity value to zero.
While you are in the configuration mode for the display, briefly pressing
the SET button confirms the applied changes and takes you to the next
setup function. You can skip individual settings by briefly pressing SET
repeatedly.
If no button is pressed for approx. 10 seconds, the device automatically
leaves the setup function.
66
- button, you can call up the recorded minimum values in