Reely Slow Flyer II Bedienungsanleitung Seite 47

Rudder Function (Mode 1 and 2)
If the control stick for the rudder function (see figure 1, item 4) is moved to the left, the elevator must deflect to the left.
The rear rudder edge must be deflected to the left by approx. 6 - 7 mm. In flight, the landing gear is pressed to the right
and the model flies to the left.
If the control stick for the rudder function (see figure 1, item 4) is moved to the right, the elevator must deflect to the
right. The rear rudder edge must be deflected to the right by approx. 6 - 7 mm. In flight, the landing gear is pressed to
the left and the model flies to the right.
Figure 17
Figure 18
47